/ Register

  1. Hello! You are currently viewing our community as a guest. Register today and apply to be a member of one of the longest standing gaming communities around. Once you have registered learn about our team and how to apply!

System build issue

Discussion in 'General Open/Public Discussion' started by Aeternus, 3 Jun 2005.


  1. Aeternus

    Aeternus DragonWolf

    Ok...so i'm trying to put together a new system... i've gotten everything in except my new ps and hd... i figured i'd start putting the rest together...

    Parts include:

    Antec P160
    DFI Lanparty SLI-DR
    AMD 64 3200+ rev.e (venice)
    2 Gig Corsair Value select 3200
    Leadtek 6600GT

    On the way:
    SEASONIC|S12-500 RT
    Seagate 7200.8 Sata 250 GB


    Issue is that upon trying to mount the mobo onto the mobo tray, the board rests unevenly. I matched up and installed the standoffs on the tray, but one of the unused standoff sockets sits right under a plastic reinforcement (for CPU socket) on the back side of the mobo.

    see my anandtech thread here

    Any help/ ideas would be great
     
    Aeternus, 3 Jun 2005
    #1
  2. ORANGE

    ORANGE DragonWolf

    after rewarding the anandtech thread I'm assuming it's resting on the cpu support?
     
    ORANGE, 3 Jun 2005
    #2
  3. Aeternus

    Aeternus DragonWolf

    yup...its an oval shaped plastic piece that sits right under the cpu.
     
    Aeternus, 3 Jun 2005
    #3
  4. Aeternus

    Aeternus DragonWolf

    well...i just hammered out the standoff socket...bent the tray up a bit...but was able to beat it back into shape
     
    Aeternus, 3 Jun 2005
    #4

Share This Page